Basic Home Theater AV Set Up Guide – Hooking It All Up
Hooking up the amplifier to your PC is relatively simple all you got to do is use the mini jack to RCA cable you get with the amp and you are rolling. If you can assign the output of your computer to be a line out that makes it even better, but otherwise you will just have to play around with the settings in order to achieve the optimum sound quality. I tested the amp with both my Travagan’s Mini speakers and my big floor standing Energy speakers which are quite efficient as well although nowhere as easy to drive as the Travagan’s speakers. I had this amp outside of my PC’s case to eliminate most noise problems and it was powered by the supplied wall adapter at all times. First of all, this amp is quite powerful even though it does not look like it, it can drive both the small and very efficient Travagan’s speakers and almost pull off running my Energy speakers. With the Travagan’s speaker it sounds quite good although the tonality and note decay is unnatural sounding compared to the Travagan’s Green. Detail wise the Travagan’s Green amplifier pulls ahead by a massive margin, but again it costs nearly five times as much as the Kama Bay amp. With my Energy speakers which are warm sounding it becomes less of a problem, although the sound quality is compromised because the amp does not have enough power to control the larger diaphragms.
Edifier S350DB review: Outstanding sounding bookshelf speakers with sound to spare
For the two longer runs, I was going to make up my own cables from at least 16 AWG shielded cable so there would be only the connector at the splitter and at the system amp. I wouldn’t be running all three sets of speakers at the same time, depending where I was and what I was doing. Needless to say, if I’m listening from the couch, I wouldn’t want the computer desk speakers running and vice versa. I would also want the speakers facing the couch to be fed from the TV as well as the computer not both at the same time, obviously.
There would also be a set of speakers in the bedroom which I would like to receive input from both the computer and from a TV in the bedroom again, not at the same time.
Once connected you can enjoy all of your CDs through the audio receiver’s speaker system. Connect the red and white RCA stereo cables into the “Audio Out” port on the back of your CD player. If you are using a portable CD player, plug the mm end of the “Y” cable into the headphone jack.
May 12, 3: I don’t know all the details of that particular receiver but looking at a picture of the back panel from the link you provided, it does not look like it has digital optical inputs. Since you are on a budget, consider instead buying a stereo 3. You should be able to hook up from your computer’s headphone or “main” analog jack on the motherboard to the back of the receiver. You can use any input in the back of the receiver except “”phono”. It won’t be full digital but I doubt you would hear a difference unless there was a defect in the cable.
Just make sure you have analog audio jack from your motherboard. Is there a big difference between the analog jack and the optical input? Using the audio jack means the codec on the motherboard is decoding digital audio and sending this to the amp as analog audio. Using the optical input means the amp decodes the digital audio, which may use a better codec than the motherboard. If your doing this for a PC connected to a TV then bookshelf speakers are fine, but the design means they are not designed for near field listening e.
The Best Bookshelf Speakers for Most Stereos
The subwoofer is rather large, just over inches wide, just under a foot in height, and just over a foot in depth. The speakers are much smaller at 5-inches wide, just under 9-inches in height, and 6-inches deep. The Edifier S DB subwoofer and satellite speakers. All three components are finished on the sides, top, bottom, and back with a reddish wood veneer.
The bottom also has four rubber feet for added grip. The front of the speakers angle inward from the box a bit and are black plastic shells which house the tweeters, cone woofers, and subwoofer.
Sep 03, · Is it correct to hook up the ins to my amplifier (then to my pc) then hook the outs to my sub woofer? Since I have two bookshelf speakers, both with these pairs of knobs, do I need to connect both of the speakers to my sub woofer or just one is sufficient?Status: Resolved.
Plug in your gaming console, computer or TV for exceptional sound quality. The multifunctional excellence that illuminates from these Bluetooth bookshelf speakers delivers such clear entertainment value. The R BT Bluetooth bookshelf speakers allow for clean aesthetics without losing quality or performance. It brings new meaning to clear sound. Fashioned with a degree angle to direct the sound exactly at you, it creates a better listening experience as it reduces interference. Its satisfying sound making your tunes rich and full delivering a full professional listening experience.
Sophisticated style The R BT Bluetooth bookshelf speakers are enclosed in hand picked walnut vinyl, for an elegant look. The high quality classic wood finish serves as a great compliment to any home decor Solid bookshelf speaker 4-inch bass drivers in each speaker create rich lows and clear highs. With the front facing bass reflex port, low frequencies are emphasized giving the bass more power.
Pair your smartphone to the chic bookshelf speaker through Bluetooth.
Anyone tried hooking a receiver to pc?
In general, they have always struck me as being thin sounding and full of tricks, trying to make you think that they have more bass than they really do, and trying to imply false detail with exaggerated treble. They also take up the same amount of space as floor-standing speakers once on their expensive stands. This fact alone speaks well of the M Be. Having heard some exceptionally good ribbon tweeters Emotiva T2s and electrostatic speakers Martin Logans lately, I was skeptical that any speaker with a dome tweeter could compete.
But the beryllium dome on the Revel Performa M Be fully held its own and offered nothing to criticize. The Revel Performa M Be speakers are ideal for a specific type of audiophile:
Beginner’s Guide To Turntables – Home Listening Edition Putting together a turntable setup is a simple process; however, there are several things you should know before purchasing your setup. This Guide To Turntable Setups will explain: the key components, the different setup configurations, and the most commonly asked questions.
You might prefer a headset Rattle the windows with the Logitech Z You can connect up to six devices, including two optical, which is ideal for anyone with home theater ambitions beyond PC gaming. A control console gives you complete control over your sound, and you can sit back with a remote control in your hand. At a whopping watts of power, these speakers are amazing for PC gaming. Sleek design, strong performance, and THX branding make these a great addition to any room.
They sit at a 4. During the day you can annoy the neighbors, and at night you can plug in headphones and listen while the family sleeps. Each satellite speaker is wall-mountable, and the wires are long enough for home theater setups. Alternatives to the Logitech Z Logitech makes some great speakers, but the Z isn’t the only option, nor is Logitech the only maker in town. Here are some alternatives that cost less yet still deliver great sound.
These speakers are becoming harder to find, but if you can get a good deal on a new or used set, they will prove effective at delivering impressive sound. They’re designed to fit in your game room or living room, and with a 4.
how to set up a subwoofer and bookshelf speakers and pc?
Click here to see our 1 pick This is especially true when the circuitry is coupled with quality hardware and big, strong magnets. I don’t blame them, it had the same effect on me, for ages, before I decided it’d be a good idea to at least try to understand it. One look at that diagram can make a lot of people go cross-eyed. If you took the challenge above to create your own little amplifier in an attempt to better understand the speakers you’re about to buy, you’ve actually already assembled a circuit that’s similar to this one.
Amplification is a pretty cool thing. One of its pioneers, the co-inventor of the transistor William Shockley once said the following:
Logitech Z happen to be the Best cheap computer speakers in our list of Best Computer Speakers under $, however that isn’t how I’d want to put up with them; as they pack in some serious punch.
How did the accident happen? How damaged is the car? How can you talk such nonsense? How is one to interpret his action? How do you mean? If they don’t have vanilla, how about chocolate? How seldom I go there! How does one address the president? How are the new cars going, cheaper than last year’s models? How do you sell these tomatoes? How does the demon appear in the first act of the opera?
How to Connect Speakers to an iMac
I believe they have XLR connectors on the back. Just make sure those are line-level inputs, not microphone inputs. The XLR is normally a balanced connection two “push-pull” signal wires plus a ground. But, with the appropriate adapter, you can connect unbalanced computer or “RCA” signals. Quote I keep the volume control in Windows and on Foobar set to maximum – assuming hoping?
With the SDB you get both a massive subwoofer and fully featured bookshelf speakers. Connect your sources via Bluetooth, RCA, optical, coaxial or AUX with these. My original intent was to set these up as computer speakers but they may make their way into the living room. High’s are crisp, mid’s are clear, low’s are Rating: % positive.
Computer speakers provide audio functionality for your computer, allowing you to listen to application and media sounds or to provide sound for an audience during presentations. Most computers have a sound card installed by default, which includes sound jacks for microphones and speakers. Once you locate the sound card jacks on your computer, you can hook up your computer speakers to the proper jack and adjust the volume to your desired level. Many times, the sound card jacks will be color coded, which allows you to determine the proper speaker jack, especially when hooking up speakers to different computer models.
Locate the sound card jacks on your computer. You will commonly find three round jacks, the size of a headphone jack, on the back of a desktop computer. Plug one speaker into the other, if required. This may vary depending on the speaker model, but you usually plug into the speaker that contains the power button and volume control. Often, this cable will also have a green colored connector.
Plug the speaker cable into the headphone jack of a laptop. Plug the power cord from the speakers into an electrical socket and turn the speakers on. Test your sound by opening an application that has sound or by playing media, such as music or a movie, on your computer.
Revel Performa M126Be Bookshelf Speaker Review
If this is the case for you, you can select from any number of speaker types that connect to the computer through its standard speaker port. If you have a special sound card installed on your computer, you may be able to connect a surround sound system or any other set of speakers that are designed for computers. Look at the back of the computer to determine which type of sound card you have. On some models, including most laptops, you may find a simple green port with a speaker icon above it; on other desktop models, you may find a number of colored ports, which may be yellow, black and green.
Follow the instructions in your speakers’ user guide to connect the various components of your surround sound system and then place them in the location recommended by the speaker manufacturer.
How do you connect passive speakers to PC? ZeusGamer Apr 9, connect 2 passive bookshelf speakers to my iphone wirelessly? remember that. just want an amp? hook up to it via a standard 3.
Bookshelf speakers serve practical and frivolous requirements, and vary in terms of dimension, aesthetics, excellence, performance. Nevertheless, users spend weeks, walking into a big-box electronics store researching, test-riding, haggling and, eventually, purchasing a new set of speakers after hearing numerous demonstrations to ascertain the right value for money.
Armed with this knowledge, your purchase can be trouble-free and downright gratifying. What Are Bookshelf Speakers? Bookshelf speakers are designed to be a part of a separate audio system. You pair them with amplifier, dedicated player, to generate a solitary, self-contained system.
Best Computer Speakers in 2018
I think I got some for a friend and they are quite bassy in their own right. I’m not sure your at your budget you can get something better. You could scour the classified section here and there are some good bargains.
I’m planning to upgrade from my cheap $40 speakers and sub to an entry level sound system. I’m planning to get a cheap $ sub and a pair of $ bookshelf speakers.
Reply 4 — Go the store or stores and listen. Most speaker specifications are nonsense, and even when the specs come from real measurements, different manufacturers use different test methods. Plus, the specs don’t usually characterize the sound in a meaningful way. I don’t always follow my own advice I’ve purchased speakers over the Net, and I’ve built speaker systems which, of course, I couldn’t listen to first! Quote Would I get an amp that somehow connects to my laptop, and then somehow connect the amp to the speakers?
Where is the best place to look for such things. As you probably know, most computer speakers are “powered” they have a built-in amp so you don’t need an amp. If you buy speakers from a computer store, they should be powered. Some monitors are powered too. Quote but studio monitors are good for music listening then? I want a flat response?